FN America

FN America PRI Low Profile Adjustable Gas Block .750 | 36091

$76.95 $90.00 14% Off

Shipping calculated at checkout.

Quantity
  • 38 In stock

FNH-36091

Be careful to select ALL options (color, size, etc) before adding to cart

Product Summary

The FN America PRI Low Profile Adjustable Steel Gas Block (MPN 36091) lets you tune how much gas reaches your AR-15's bolt carrier for suppressed or unsuppressed shooting. Machined from 1141 high-strength steel with a magnesium phosphate finish, it fits 0.750 inch gas journals, stands 1.38 inches tall, and mounts with two 10-32 set screws. Home builders, competition shooters, and agency armorers use it under free-float handguards.The FN America PRI Low Profile Adjustable Steel Gas Block (MPN 36091) lets you tune how much gas reaches your AR-15's bolt carrier for suppressed or unsuppressed shooting. Machined from 1141 high-strength steel with a magnesium phosphate finish, it fits 0.750 inch gas journals, stands 1.38 inches tall, and mounts with two 10-32 set screws. Home builders, competition shooters, and agency armorers use it under free-float handguards.

Material(s)
  • Steel
Care Guide

• Wipe carbon and fouling off the block during rifle cleaning
• Keep the gas port and adjustment screw free of debris
• Check that the set screws stay tight after installation
• Recheck the gas setting when you change ammo or suppressor
• Store spare parts in a dry place to prevent rust

Audio Overview

SHIPS FROM:  MI

COUNTRY OF ORIGIN: 

MPN:  36091

UPC:  

Verified Merchant

Secure Checkout

PCI-compliant VISA MC AMEX DISC

Overview of the FN America PRI Adjustable Gas Block | 36091

Tune your AR-15 to your ammo and your suppressor

Add a suppressor or switch ammunition, and your rifle can start running over-gassed: harder recoil, more gas in your face, and extra wear on the bolt carrier. The FN America PRI Low Profile Adjustable Steel Gas Block (MPN 36091) lets you set how much gas reaches the action, so the rifle cycles reliably without the excess.

Made by Precision Reflex, Inc. (PRI) and sold under FN America part number 36091, this .750 inch gas block is machined from 1141 high-strength steel with a magnesium phosphate finish. A single #8-32 adjustment screw controls gas flow, and two 10-32 set screws lock the block to the barrel.

Small footprint, full control

  • Low profile: 1.38 inches tall with no sight tower or rail
  • Adjustable: dial gas flow up or down with one screw
  • Built for builders: a smart pick for home builders, competition shooters, and agency armorers

Key Features

  • Adjustable gas flow: an #8-32 adjustment set screw meters gas to the bolt carrier for suppressed, unsuppressed, or light-load setups.
  • Low profile design: a compact 1.38 in. tall, 0.92 in. wide, 1 in. long body with no front sight or rail.
  • High-strength steel: machined from 1141 steel for durability under heat and repeated firing.
  • Protective finish: magnesium phosphate coating helps resist corrosion.
  • Set screw mount: two bottom-mounted 10-32 set screws hold the block on a .750 in. gas journal.
  • Standard gas tube height: the gas tube sits 0.625 in. above bore center, and the gas port hole is 0.250 in. from the back of the block.

Specifications

Brand FN America (made by Precision Reflex, Inc.)
MPN 36091
PRI Part Number 05-075-03
SKU FNH-36091
Type Low profile adjustable gas block
Gas Journal Diameter 0.750 in.
Material 1141 high-strength steel
Finish Magnesium phosphate
Color Black
Height 1.38 in.
Width 0.92 in.
Length 1 in.
Bore Center to Gas Tube 0.625 in.
Mounting Two 10-32 set screws
Adjustment #8-32 adjustment set screw
Weight 0.14 lb (retailer listing)

Compatibility

This gas block fits AR-15 and M16 pattern barrels with a 0.750 inch gas journal, including the FN America AR-15 Mid-Length Barrel 20-100041 and the FN America AR-15 Button Rifled Barrel M4. Some retailers also list AR-308 rifles with a .750 inch gas seat. Measure your barrel at the gas port before you order.

The low profile shape is made to sit under a free-float handguard such as the Midwest Industries Combat Rail M-LOK Handguard or the Bravo Company USA MCMR. Check the inside clearance of your handguard against the 1.38 in. height. On barrels with a step for an A2-style handguard, retailers note a gap of about 0.035 in. behind the block that you can fill with a spacer or leave open.

It does not fit 0.625 in., 0.875 in., or 0.936 in. gas journals, and it mounts with set screws, not taper pins. Your gas tube must match your barrel's gas system length.


Intended Users

Home builders and hobbyist gunsmiths use this block to finish a new AR-15 upper or swap out a fixed front sight base. Suppressor owners use the adjustment screw to cut back-pressure and gas blowback at the charging handle. Competition shooters tune it for softer recoil with light loads. Law enforcement armorers and agency rifle instructors can use it to set patrol carbines for duty ammunition, and preppers can build a dependable, suppressor-ready rifle around it.


What's Included

  • One (1) FN America PRI Low Profile Adjustable Steel Gas Block, .750 in., MPN 36091
  • Two (2) 10-32 mounting set screws and one (1) #8-32 adjustment screw
  • One (1) roll pin for the gas tube

Not included: barrel, gas tube, handguard, and armorer's tools such as the Midwest Industries Professional Armorer's Wrench. Order these separately.


Available at WCUniforms

WCUniforms is owned by a U.S. Marine veteran and a U.S. Coast Guard veteran who also served as a city police officer and EMT, so we know what duty and range gear has to do. Founded in 2013 in San Diego, California, we ship this gas block from our Michigan warehouse to customers across the United States. Pair it with an FN barrel and a free-float handguard for a complete, tunable AR-15 build.

Related Gear: Barrels & Accessories | On Gun & Other Accessories | Shooting Accessories

Shop the Brand: View all FN America products

Frequently Asked Questions about the PRI Adjustable Gas Block 36091

What size barrel does the PRI 36091 gas block fit?

The PRI 36091 fits barrels with a 0.750 inch gas journal, the common size on AR-15 and M16 government and M4 profile barrels. Measure your barrel at the gas port to confirm before ordering.


What does an adjustable gas block do on an AR-15?

An adjustable gas block controls how much gas reaches the bolt carrier. You can reduce extra gas from a suppressor or hot ammunition for softer recoil, less blowback, and less wear on parts.

How does the PRI low profile gas block mount to the barrel?

The PRI low profile gas block mounts with two 10-32 set screws on its bottom. A separate #8-32 adjustment screw sets the gas flow once the block is installed.

Will a low profile gas block fit under a free float handguard?

Yes, a low profile gas block is built to fit under most free float handguards because it has no front sight or rail. This PRI block is 1.38 inches tall, so check your handguard's inside clearance.

What is the PRI 36091 gas block made of?

The PRI 36091 is machined from 1141 high-strength steel with a magnesium phosphate finish, according to retailer listings. The finish helps the block resist corrosion.

Shop with confidence. We make returns easy.

If something is not right, return or exchange it within 30 days. Fast handling. Clear policies. Zero hassle.

Old-school service you can still count on

Former law enforcement, EMT, and veteran-owned. Reach a real person instantly by phone or chat. No robots. No voicemails. No long waits.

Fast Order Processing

92% of in-stock products ship same-day (M-F). We always aim to ship out within 48-hours. Spend $199 or more to qualify for FREE shipping

Stay informed every step of the way

You will receive SMS and email tracking updates so you always know where your order is and when to expect it.