Aker Leather Teardrop Duty Handcuff Case | A501

Overview of the Aker Leather Teardrop Handcuff Case | A501

You want your cuffs to ride in the same spot every time, stay secure through a full shift, and still draw fast when things move quickly. The Aker Leather Teardrop Handcuff Case A501 is built for that rhythm of real patrol work. Handcrafted in the USA from full grain vegetable tanned leather, this teardrop style handcuff case follows the California Highway Patrol specification and has become a favorite on duty belts across agencies.

The A501 rides close to the body, with molded leather that cradles a single pair of chain handcuffs. Two angled belt slots on the back, visible in the rear photo, pull the case in tight on duty belts up to 2.25 inches so it does not sag or wander during foot pursuits or vehicle work.

You can match the rest of your rig with either a smooth plain finish or a detailed basketweave pattern. Visible snaps include bright chrome and brass, while hidden snap options keep hardware low profile. With model number A501 stamped into the back panel, this is a professional grade cuff case trusted by officers, deputies, and security teams who carry every day.

Key Features

• Material: Full-grain, vegetable-tanned leather, molded into a teardrop profile and stitched with heavy-duty nylon-bonded thread.

• Finish Options: Available in smooth plain or classic basketweave black leather to match standard duty gear.

• Snap Hardware: U.S. made solid brass snap fastener offered in chrome, brass, or black finishes, plus a hidden snap option for a low-profile look.

• Duty Belt Fit: Dual pre-molded rear belt slots accept duty belts up to 2.25 inches wide and angle inward to keep the case upright and prevent sagging. 

• Capacity: Holds one pair of standard chain handcuffs, including Smith & Wesson Model 100 and Peerless 700C and 730C cuffs.

• Duty Proven Design: Teardrop design specified by the California Highway Patrol and issued by agencies such as the Riverside County Sheriff’s Department.

• Craftsmanship: Smooth, finished edges and precise molding for long service life during daily patrol and transport work.

• Made in the USA: Aker Leather model A501, proudly manufactured in the United States.
  
  

Compatibility

The Aker Leather Teardrop Handcuff Case A501 is designed to fit one pair of standard chain handcuffs commonly used on patrol and in corrections. Confirmed compatible models include:

• Smith & Wesson Model 100 chain handcuffs

• Peerless 700C chain handcuffs

• Peerless 730C chain handcuffs

The molded leather pocket fits most similarly sized chain style cuffs from other major manufacturers.

This case is optimized for wear on traditional uniform duty belts up to 2.25 inches wide. The angled rear slots are pre cut and molded so the case threads securely over a leather, nylon, or synthetic duty belt and sits tight against the body.

The A501 is not ideal for oversized, hinged, or rigid handcuffs, which may sit too tight or not seat fully inside the teardrop pocket. Users with specialty restraints should confirm dimensions before purchase.

Intended Users

The Aker Leather A501 Teardrop Handcuff Case is built for professionals who carry restraints as part of their daily work. Typical users include:

• Police officers and detectives who need a fast, consistent draw on patrol or during investigations.

• Sheriff’s deputies, state troopers, and highway patrol officers who run full duty belts through long shifts and traffic stops.

• Corrections officers and probation officers who require secure cuff retention while moving between housing units, courts, and transport details.

• Court bailiffs and security officers who need a clean, uniform appearance in front of the public while keeping a single pair of chain cuffs close at hand.

• Loss prevention agents, bounty hunters, and police academy recruits who want a duty grade cuff case that matches standard police style rigs.

In all of these roles, the A501 helps keep your handcuffs anchored in a predictable position on your belt so you can focus on your surroundings, not your equipment.

What’s Included

• One Aker Leather Teardrop Handcuff Case, model A501, in your chosen finish and snap style

• Integrated dual belt slots for duty belts up to 2.25 inches

Handcuffs, duty belts, and any other accessories shown in agency use are not included.

Frequently Asked Questions about Aker Leather Teardrop Handcuff Case | A501

Question 1: Will my standard chain handcuffs fit the Aker A501?

Yes. The A501 is built for a single pair of standard chain handcuffs. It has confirmed fit for Smith & Wesson Model 100, Peerless 700C, and Peerless 730C cuffs, along with most similar models from other major brands that share the same profile.

Question 2: Does this cuff case work on a 2.25 inch duty belt?

It does. The rear photo shows two elongated belt slots molded into the back of the case. These slots accept duty belts up to 2.25 inches wide and are angled inward so the case stays upright and resists sagging during movement.

Question 3: What is the difference between plain and basketweave finishes?

The plain finish has a smooth, glossy black leather surface that pairs well with modern minimalist rigs. The basketweave finish shows a traditional woven pattern with decorative border stamping, which matches classic law enforcement duty gear. Both are crafted from full grain leather and perform the same in the field.

Question 4: Which snap option should I choose?

Chrome and brass snaps provide a visible metal accent that complements other hardware on your belt. The hidden snap option places the fastener under the flap for a cleaner, more subdued front. All snap styles are US made, field tested, and provide a secure closure when you seat the flap fully.

Question 5: Is the A501 approved for use by major agencies?

Yes. The teardrop design follows specifications used by the California Highway Patrol, and many departments, including the Riverside County Sheriff’s Department, issue this model or authorize it for duty use. Agency policies can vary, so it is always a good idea to confirm with your quartermaster or uniform coordinator.

Why Buy from WCUniforms

When you buy the Aker Leather Teardrop Handcuff Case A501 from WCUniforms, you are working with a team that has actually worn this style of gear on duty. WCUniforms is owned by a former law enforcement officer and EMT, and USMC and USCG military veterans. We have used the products we sell in the field, so we understand what matters when you are on shift. Most in stock orders ship the same day, with a goal of within 48 business hours, and we offer hassle free 30 day returns with some exceptions. Every order includes SMS and email tracking updates, and you can reach a real human through instant chat during business hours or by phone at 855-452-4440.

MPN: A501