Monadnock Front Draw® 360° Swivel Clip-On Baton Holder for PR-24®

Overview of the Monadnock Front Draw® 360° Swivel Baton Holder

When you carry a PR-24® or Control Device baton on duty, your holder has one job: put that baton in your hand fast, from whatever position your body happens to be in. Rigid, fixed-angle holders force compromises. The Monadnock Front Draw® 360° Swivel Clip-On Baton Holder eliminates that problem entirely.

Built from tough polycarbonate and assembled in the USA, the 1000206 rotates a full 360 degrees and locks into any of eight distinct positions, so your draw angle is always optimized for your stance, whether you are standing, seated in a patrol vehicle, or moving quickly through a crowd. A molded tension spring keeps your baton secured between uses while releasing cleanly under a deliberate draw stroke.

The clip-on belt attachment slides onto your duty belt or waistband without tools and holds firm throughout a full shift. Law enforcement officers, corrections officers, and security professionals who carry PR-24 or Control Device batons rely on this holder shift after shift because it removes positioning uncertainty from a moment that demands certainty.

Available in Plain Black and Basket Weave Black finishes to match department uniform standards.

Key Features

• Material: Durable polycarbonate construction resists cracking, impact, and the wear of daily duty carry
• 360° Swivel Mechanism: The holder rotates a full 360 degrees and locks into one of eight positions for a personalized, body-position-friendly draw angle
• Molded Tension Spring Retention: Holds the baton securely in place open or closed, while still releasing smoothly under a firm, deliberate draw
• Re-Holster in Any Lock Position: Whether your baton is expanded or collapsed, you can re-holster it while the holder remains locked in your preferred orientation
• Clip-On Belt Attachment: Attaches directly to a duty belt or waistband without tools; recommended belt width is 2.75 inches (6.99 cm); an adhesive foam pad is included and can be trimmed for narrower belts
• Baton Compatibility: Designed specifically for 1-inch diameter PR-24® style batons in 21-inch and 24-inch lengths (MON-3015/1000206 and MON-3615/1000264) and the 24-inch length only (MON-3010/1000204)
• Finish Options: Plain Black (MON-3015, MON-3010) and Basket Weave Black (MON-3615) to satisfy department uniform requirements
• Country of Origin: Made in the USA
• Warranty: Monadnock Lifetime Replacement Guarantee under normal field use

Specifications

Compatibility

Baton Compatibility

This holder is engineered specifically for 1-inch diameter PR-24® style batons and Monadnock Control Device batons in 21-inch and 24-inch lengths. The MON-3015 (1000206) and MON-3615 (1000264) variants each accommodate both the 21-inch and 24-inch lengths. The MON-3010 (1000204) fits the 24-inch length only.

This holder is not designed for straight expandable batons (such as AutoLock® or SX series), which require a separate, side-handle-free holder. Do not use this holder with batons exceeding 1-inch shaft diameter.

Belt Compatibility

The clip-on back is sized for a recommended belt width of 2.75 inches (6.99 cm). An adhesive foam pad is included and can be trimmed to fill the gap on narrower belts, making it compatible with most standard duty belts in the 2.25-inch to 2.75-inch range.

Finish Matching

Plain Black suits most modern nylon duty rigs and minimalist uniform standards. Basket Weave Black matches traditional basket weave leather belt configurations common in patrol and corrections departments.

Intended Users

The Monadnock Front Draw® 360° Swivel Clip-On Baton Holder is built primarily for uniformed law enforcement officers who carry a PR-24® or Control Device baton as part of their standard duty loadout. Patrol officers and motorcycle officers benefit most from the 8-position swivel, which lets you position the holder for a natural cross-draw or forward draw regardless of how your belt sits in a vehicle seat.

Corrections officers and jail deputies who spend extended shifts moving between standing and seated positions find the 360° rotation especially valuable; it means your baton is always accessible from whatever posture the moment demands.

Court bailiffs and probation officers who carry a baton for deterrence and occasional force option appreciate the secure tension-spring retention that keeps the baton out of sight and in control without the need for an active retention strap.

Security supervisors and event security professionals authorized to carry a PR-24-style baton rely on this holder for a professional, uniform-ready presentation that does not sacrifice speed.

Finally, law enforcement academy instructors and training officers often use this holder in conjunction with PR-24 training programs, where consistent, repeatable draw mechanics matter for building proper muscle memory.

What's Included

• 1 x Monadnock Front Draw® 360° Swivel Clip-On Baton Holder (in your selected finish and size variant)
• 1 x Adhesive foam pad (pre-cut; can be trimmed to fit narrower duty belts)

Note: Baton not included. A compatible 21-inch or 24-inch PR-24® or Control Device baton must be purchased separately. 

Available at WCUniforms

WCUniforms is a veteran-owned, law enforcement-operated specialty retailer serving police officers, corrections professionals, security personnel, and public safety workers across the United States. The Monadnock Front Draw® 360° Swivel Clip-On Baton Holder is stocked and ships same day (Monday through Friday) so your duty loadout never waits. Unlike generic online marketplaces, wcuniforms.com is staffed by people who have worn this gear on the job and can answer your compatibility questions before you order. Shop with confidence at wcuniforms.com, backed by an A+ BBB rating and a hassle-free 30-day return policy.