Bravo Company USA Vertical Grip Mod 3-KeyMod™ - Black or Tan

Bravo Company USA Vertical Grip Mod 3-KeyMod™ - Black or Tan

Bravo Company manufacturing has gained quite a cult like following due to the fact that BCM takes quality control to a new level. BCM is know for strict tolerances and extremely high quality control to ensure the products they make can be trusted in the field under any circumstance. Don't trust you next AR build to just anyone. Make sure you use a name you know and trust. Make sure it's Bravo Company!

This AR-15 BCMGUNFIGHTER Vertical Grip Mod 3 features Key Mod Mount Interface for a rock solid no wiggle lock up. It has an ergonomic grip angle that can be mounted forward or back to provide you with the ideal hand position for the perfect forward grip. The flat sides and aggressive texturing will proved excellent control at all times under any circumstances. It's constructed from high impact polymer and has a robust design. Get the BCM GUNFIGHTER Vertical Grip Mod 3 today and see what a difference the right grip can make!  

Direct Attach to KeyMod Version

• Low-profile length for increased mobility and decreased 'snag' factor.

• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.

• Can be mounted in reverse angle to increase control when grabbing handguard and grip.

• Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.

• Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.

• Made in the U.S.A., manufactured from high-quality, impact-resistant polymers.

Tools needed: T15 Torx Driver (not supplied)

• Insert tool (T15 Torx™ driver) into the screw from under the BCM® KeyMod Vertical Grip

• Push tool into the screw to extend the KeyMod anchor, making it protrude from the top.

• Align the anchors in the two selected large holes of the desired KeyMod slots. Grip can be installed in your desired orientation, angled forward or back.

• After the anchor is inserted, slide the BCM Vertical Grip forward until it travels no further.

• Push the BCM Vertical Grip against rail, engaging the accessory's recoil lugs to the intersecting KeyMod opening.

• With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn).

• Ensure there is no wiggle or forward/backward movement once tight.

*Blue thread locker may be used on threaded fasteners